返回主站|会员中心|保存桌面|手机浏览
普通会员

北京天洋精电光伏科技有限公司

首页 > 供应产品 > [新品] 新能源充放电控制器(SL-08)
[新品] 新能源充放电控制器(SL-08)
浏览: 971
单价: 面议
最小起订量:
供货总量:
发货期限: 自买家付款之日起 天内发货
有效期至: 长期有效
最后更新: 2022-11-25 19:17
 
详细信息

·         三个LED全面显示蓄电池的不同状态

·         切断负载前声音预警提示

·         PWM脉冲宽度调节(串接调解方式)

·         三段式充电,强充-均衡充-浮充

·         12 V和24 V自动识别

·         内置温度补偿

·         大口径接线端子(***大16平方毫米)

·         电池电量(SOC)和电池电压两种不同的放电保护模式

·         全面的电子保护

·         CML系列产品是新一代多功能低成本的太阳能充放电控制器。其电子线路配备了性能优良的单片机微处理芯片,具有高效率充电、三个LED全功能显示及蜂鸣器声音预警等功能。

·         CML系列控制器脉冲宽度PWM调节的三段式的充电方式(强充电-均衡充电-浮充电),可用于给全密封或不密封的铅酸蓄电池充电。并且内置温度补偿功能。

·         CML有两种放电保护模式,SOC电池电量控制和电池电压控制。

·         三个LED可清晰地显示蓄电池的电量和工作电状态。

·         CML是一款切断负载前蜂鸣器预警的控制器。

 

型号

SL-08

额定电压

12/24 V 自动识别

***大充/放电电流

20A

浮充电压

13.7/27.4 V (25°C)

强充电压

14.4 /28.8 V (25 °C), 2 小时
蓄电池电压< 12.3/24.6 V 激活

均衡充电压

14.8/29.6 V (25 °C), 2 小时
蓄电池电压< 12.1/24.2 V 激活

过放保护:
SOC保护切断电压
电压保护切断电压
恢复电压


11.4 – 11.9 V / 22.8 – 23.8 V
11.0/22.0 V
12.8/25.6 V

高压保护

15.5/31.0 V

欠压保护

10.5/21.0 V

***大太阳能电池板电压
(压敏电阻过压保护)

30 V (12 V系统)
50 V (24 V系统)

温度补偿
(充电电压)

-25 mV/K (12 V系统)
-50 mV/K (24 V系统)

自消耗电流

< 4 mA

接地

共正极设计,只允许正极接地

环境温度范围

-40 至 +50 °C

***高海拔

海拔4,000 m

蓄电池类型

铅酸电池(胶体, AGM, 液体)

接线端子***大线径

16 mm2

重量

160 g

尺寸(WxHxD)

80 x 100 x 32 mm

防护等级

IP22

 

 

 Three comprehensive LED display different states of the battery

 

Voice warning prompt before, to cut off the load

 

, PWM pulse width adjuster (concatenated mediation way)

 

A three-stage charging, strong charger - balance charger - floating

 

Automatic identification of 12 V and 24 V

 

Built-in temperature compensation

 

, large diameter terminals (maximum 16 square millimeter)

 

(SOC) of battery capacity and battery voltage of two different discharge protected mode

 

, a comprehensive electronic protection

 

, CML series products are a new generation of multi-functional low-cost solar charge controller. The electronic circuit is equipped with excellent performance of the single chip microprocessor chip, highly efficient charging, three fully functional LED display and buzzer sound warning function.

 

CML series controller, PWM pulse width adjustment of a three-stage charging mode (strong charge - equalizing charge - float charging), can be used to seal or not sealed lead-acid battery charging. And a built-in temperature compensation function.

 

CML has two kinds of discharge protected mode, SOC battery and battery voltage control.

 

, three LED can clearly display the battery state of electric power and work.

 

The CML is a buzzer alarm controller before cut off the load.

 

 

 

model

 

SL - 08

 

The rated voltage

 

Automatic identification of 12/24 V

 

Maximum charge/discharge current

 

20 a,

 

Float charging voltage

 

13.7/27.4 V (25 ° C)

 

Strong charging pressure

 

14.4/28.8 V (25 ° C), 2 hours

The battery voltage < 12.3/24.6 V activation

 

Pressure equalizing charge

 

14.8/29.6 V (25 ° C), 2 hours

The battery voltage < 12.1/24.2 V activation

 

Put protection:

SOC cut off voltage protection

Voltage protection to cut off the voltage

Recovery voltage

 

 

11.4-11.9 V / 22.8-23.8 V

11.0/22.0 V

12.8/25.6 V

 

High voltage protection

 

15.5/31.0 V

 

Under voltage protection

 

10.5/21.0 V

 

The largest solar panels voltage

(varistor overvoltage protection)

 

30 V (12 V system)

50 V, 24 V system)

 

Temperature compensation

(charging voltage)

 

- 25 mV/K (12 V system)

- 50 mV/K (24 V system)

 

Since the current consumption

 

< 4 mA

 

grounding

 

The positive design and only allow the anode grounding

 

Ambient temperature range

 

40 to 50 ° C -

 

The highest elevation

 

At an altitude of 4000 m

 

Battery type

 

Lead-acid batteries (colloid, AGM, liquid)

 

The largest terminal wire diameter

 

16 was

 

The weight of the

 

160 g

 

Size (WxHxD)

 

80 x 100 x 32 mm

 

Protection grade

 

IP22

询价单
产品分类
  • 暂无分类
站内搜索
 
友情链接
  • 暂无链接