Product Des
cription:
| Specification |
|---|
| Cells | Mono crystal 156mmx156mm square |
|---|
| Number of cells | 72 (6x12) series connected |
|---|
| Typical application | 36V DC |
|---|
| Maximum voltage | 1000V DC |
|---|
| Size | 1956(L) x992(W) x50(H) mm |
|---|
| Weight | 27 Kgs |
|---|
| Front glass | 4.0 mm |
|---|
| Tolerance |
|---|
| Parameter | Values | Unit |
|---|
| Operating temperature | -45 to 80 | ℃ |
|---|
| Hail diameter @ 80Km/h | Up to 25 | mm |
|---|
| Continuous wind pressure | Up to 24 | m/s |
|---|
| Connection terminals |
|---|
| Connector type | MC4 |
|---|
| Parameter |
|---|
| Note: defined as standard deviation of thousands measurements.Absolute power values depend on the measuring system.They can differ by +/- 3% from one measuring system to another. |
| Model | DSP300M |
|---|
| Rating power (Pm) | 300W |
|---|
| Efficiency of cell | ≥17.1% |
|---|
| Tolerance | ±3% |
|---|
| Rated current (Im) | 8.15A |
|---|
| Rated voltage (Vm) | 36.5V |
|---|
| Short circuitCurrent (Isc) | 8.56A |
|---|
| Open circuit Voltage (Voc) | 45.4V |
|---|
| NOCT:45℃+2 ℃ | Temperature coefficient Voltage: 0.16V/℃ / -(160 +10)mV/oC |
|---|
| Temperature coefficient of power: -(0.5+0.05)%/oC |
| Temperature coefficient Current: 0.06%/℃ / (0.065 +0.015)%/oC |
| Characteristic curves | |
|---|
| Mechanical characteristics | |
|---|
| Dimensions | |
|---|
| Certificate | CE |
|---|
Efficiency
Low voltage temperature coefficient allows higher power output under high temperature conditions
High efficiency, high reliability solar panels to ensure stable output of our products
Material
Advanced EVA encapsulation system with three-back, to meet the stringent safety requirements for working pressure.
Sturdy aluminum frame allows modules Yang board can be installed on any standard bracket systems, and can withstand harsh conditions.
Ultra reliable bypass diodes to prevent defective as a mask or overheating caused by solar panels cause the damage.
Innovative, environmentally friendly packaging, with the pile side of the way to ensure the module to achieve the desired state.
New frame design with hexagonal drainage holes, more holes of the ground, the flexibility to install and use.
Advantage
Manufacturers have been certified by ISO900 1:2000
High efficiency, high safety, high reliability
Output power tolerance+/-3%
Power output of the limited warranty of 25 years, the limited warranty of materials and work for two years.
