Product Des
cription:
| Specification |
|---|
| Cells | Polysilicon 156mmx156mm square |
|---|
| Number of cells | 72 (6x12) series connected |
|---|
| Typical application | 24V DC |
|---|
| Maximum voltage | 1000V DC |
|---|
| Size | 1956(L) x992(W) x45(H) mm |
|---|
| Weight | 27 Kgs |
|---|
| Front glass | 3.2 mm |
|---|
| Tolerance |
|---|
| Parameter | Values | Unit |
|---|
| Operating temperature | -45 to 80 | ℃ |
|---|
| Hail diameter @ 80Km/h | Up to 25 | mm |
|---|
| Continuous wind pressure | Up to 24 | m/s |
|---|
| Connection terminals |
|---|
| Connector type | MC4 |
|---|
| Parameter |
|---|
| Note: defined as standard deviation of thousands measurements.Absolute power values depend on the measuring system.They can differ by +/- 3% from one measuring system to another. |
| Model | DSP245P |
|---|
| Rating power (Pm) | 245W |
|---|
| Efficiency of cell | ≥14.00% |
|---|
| Tolerance | ±3% |
|---|
| Rated current (Im) | 6.8A |
|---|
| Rated voltage (Vm) | 36V |
|---|
| Short circuitCurrent (Isc) | 7.87A |
|---|
| Open circuit Voltage (Voc) | 43.8V |
|---|
| NOCT:45℃+2 ℃ | Temperature coefficient Voltage: 0.16V/℃ / -(160 +10)mV/oC |
|---|
| Temperature coefficient of power: -(0.5+0.05)%/oC |
| Temperature coefficient Current: 0.06%/℃ / (0.065 +0.015)%/oC |
| Characteristic curves | |
|---|
| Mechanical characteristics | |
|---|
| Dimensions | |
|---|
| Certificate | CE |
|---|
Quality Characteristics are as below:
a) High-efficient solar cells ensure high performance of solar module and create more power under same condition.
b) Average power of PV modules is within positive tolerance.
c) 3.2mm high-transparent low-iron toughened glass, EVA laminate and water-proof TPT yield long life modules while enhancing cell performance.
d) Stable, heavy duty anodized aluminum frames with convenient mounting-access, for high wind pressure and snow load.
e) Bypass diodes to avoid hot-spot effect.
f) The backside of frames is equipped with drainage holes in order to eliminate the risk that rain or snow water may accumulate in the frame trough and freeze or even bend the frame in cold season.
g) 3 years warranty for PV module and its materials and corresponding fittings, 90% output of rated power after 10 years and 80% output of rated power after 25 years under Standard Test Conditions.
h) Comply with IEC61215 and IEC 61730 standard.
i) Produced under systemic quality control covering all processes and factors.
