价格：
电议
Product Des
cription:
| Specification |
|---|
| Cells | Polysilicon 156mmx156mm square |
|---|
| Number of cells | 72 (6x12) series connected |
|---|
| Typical application | 24V DC |
|---|
| Maximum voltage | 1000V DC |
|---|
| Size | 1956(L) x992(W) x50(H) mm |
|---|
| Weight | 27 Kgs |
|---|
| Front glass | 3.2 mm |
|---|
| Tolerance |
|---|
| Parameter | Values | Unit |
|---|
| Operating temperature | -45 to 80 | ℃ |
|---|
| Hail diameter @ 80Km/h | Up to 25 | mm |
|---|
| Continuous wind pressure | Up to 24 | m/s |
|---|
| Connection terminals |
|---|
| Connector type | MC4 |
|---|
| Parameter |
|---|
| Note: defined as standard deviation of thousands measurements.Absolute power values depend on the measuring system.They can differ by +/- 3% from one measuring system to another. |
| Model | DSP285P |
|---|
| Rating power (Pm) | 285W |
|---|
| Efficiency of cell | ≥16.27% |
|---|
| Tolerance | ±3% |
|---|
| Rated current (Im) | 8.07A |
|---|
| Rated voltage (Vm) | 35.3V |
|---|
| Short circuitCurrent (Isc) | 8.44A |
|---|
| Open circuit Voltage (Voc) | 44.9V |
|---|
| NOCT:45℃+2 ℃ | Temperature coefficient Voltage: 0.16V/℃ / -(160 +10)mV/oC |
|---|
| Temperature coefficient of power: -(0.5+0.05)%/oC |
| Temperature coefficient Current: 0.06%/℃ / (0.065 +0.015)%/oC |
| Characteristic curves |  |
|---|
| Mechanical characteristics |  |
|---|
| Dimensions | .jpg) |
|---|
| Certificate | CE |
|---|
Main Characteristics:
1. High efficiency & high stability
2. Monocrystalline or Polycrystalline solar cells, range from 5Wp to 290Wp.
3. Unique frame design to reinforce sealing and there are drainage holes on the border components, eliminate the framework of deformation caused by rain or snow accumulated in the framework.
4. Strong aluminum frames to strengthen the load hold and to stand against high wind.Special mounting holes on the frames suitable for long term mounting.
5. High transparency low iron tempered glass with enhanced stiffness and impact resistance property.
6. Advanced EVA encapsulation system with multi-layer back sheets to better product modules
7. Output tolerance: +/-5%, cell efficiency above 16%
8. Approvals: CE, IEC61215/61730, ISO, TUV
9. Back: TPT
10. Encapsulant :EVA
11. frame: Aluminum alloy
12. Preeminent aesthetic appearance and easy installation
