价格：
电议
Product Des
cription:
| Specification |
|---|
| Cells | Mono crystal 156mmx156mm square |
|---|
| Number of cells | 60 (6x10) series connected |
|---|
| Typical application | 24V DC |
|---|
| Maximum voltage | 1000V DC |
|---|
| Size | 1640(L) x992(W) x50(H) mm |
|---|
| Weight | 23 Kgs |
|---|
| Front glass | 4 mm |
|---|
| Tolerance |
|---|
| Parameter | Values | Unit |
|---|
| Operating temperature | -45 to 80 | ℃ |
|---|
| Hail diameter @ 80Km/h | Up to 25 | mm |
|---|
| Continuous wind pressure | Up to 24 | m/s |
|---|
| Connection terminals |
|---|
| Connector type | MC4 |
|---|
| Parameter |
|---|
| Note: defined as standard deviation of thousands measurements.Absolute power values depend on the measuring system.They can differ by +/- 3% from one measuring system to another. |
| Model | DSP240D |
|---|
| Rating power (Pm) | 240W |
|---|
| Efficiency of cell | ≥16.66% |
|---|
| Tolerance | ±3% |
|---|
| Rated current (Im) | 8.11A |
|---|
| Rated voltage (Vm) | 29.6V |
|---|
| Short circuitCurrent (Isc) | 8.32A |
|---|
| Open circuit Voltage (Voc) | 38.4V |
|---|
| NOCT:45℃+2℃ | Temperature coefficient Voltage: 0.16V/℃ / -(160 +10)mV/oC |
|---|
| Temperature coefficient of power: -(0.5+0.05)%/oC |
| Temperature coefficient Current: 0.06%/℃ / (0.065 +0.015)%/oC |
| Characteristic curves |  |
|---|
| Mechanical characteristics |  |
|---|
| Dimensions |  |
|---|
| Certificate | CE |
|---|
Features:
High-Efficiency and high power output
- utilizing high-quality and high-efficiency solar cells in the modules to ensure high power output.
- Reinforced Solar Glass
- The use of high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness and impact resistance.
- Advanced Cell Encapsulation
- The interconnected cells are embedded in ultra transparent EVA with multilayer backsheets for additional weather protection.
Stability:
- Bypass diode minizes the power drop caused by shade
- Optimized Module Surface Area
- The distance between the frame edge and the cell circuitry is calculated according to the electrical output optimization.
- Easy installation
- The specially designed module frame makes installing process easy.
Strong and reliable:
- Anodized aluminum frame substantially increases module endurance against high winds and snow load.
- Tight Quality Control
- We employ quality control standards at each stage of the production. All modules are designed and manufactured in our ISO9001 certified factories
- Surpassing Industry Standards
- Our modules meet the highest industry standards possible in accordance to CE, ISO9001, IEC and TUV certifications. ut.
